Ultrasonic Pure Water Treatment
Equipment name, specification, model and quantity
Device name |
Specifications | Quantity/set | Note |
Ultrasonic water treatment module |
DS-5000T |
1 | Custom module |
Ultrasonic equipment is a kind of equipment to convert electrical energy into high-frequency mechanical vibration, mainly by ultrasonic transducer, separator, guide buffer network,. Ultrasonic wave can produce cavitation effect, mechanical effect, thermal effect and chemical effect, through these effects to achieve the purpose of use.
Ⅲ. The basic structure of equipment
Ultrasonic water treatment module + ultrasonic drive power supply.
Input power: 380V (red, black and blue for three-phase, yellow and green for ground)
Connect the output power of the module (red +; Black -; The blue +; Grey -) Ultrasonic generator socket (380V) two rows of sockets up and down
Technical parameters of ultrasonic equipment
1. Overall technical parameters:
Rated power of single ultrasonic equipment |
5000W |
Total constant power |
1×5000W=5000W |
Working frequency |
28.0±0.5kHz |
The input voltage |
380V±10%/50-60Hz |
Overall equipment size | See attached figure |
Total mass of equipment | About 100 kg |
2. Parameters of vibration parts
Function: Convert the electric energy of the ultrasonic driving power into the mechanical energy of ultrasonic vibration and radiation ultrasonic wave.
5000W Ultrasonic acoustic chemical equipment (single set) | ||||
Components and quantity(Single vibration unit) |
Part name | Model or type | Core material | Quantity / per unit |
Ultrasonic module |
5000T |
Piezoelectric ceramic | 1 | |
Ultrasonic generator |
5500W |
Mitsubishi power module | 1 | |
Fixed flange | Integrated with water treatment module | High strength alloy steel | 1 | |
The shell | rotective shell | Mirror stainless steel | 1 | |
Dimensions of vibrating parts |
See attached figure | |||
Maximum bearing temperature |
80℃ |
|||
Maximum withstand pressure |
0.6MPa |
|||
Vibration unit power | 5000 W/single |
3. Driving power parameters
Role: generate high power and high frequency AC electric energy, all digital control, drive ultrasonic vibration parts to work.Model of driving power | Power control cabinet | |
Main structural components of drive power supply equipment | Name | Number |
Ultrasonic drive power module | 1 sets | |
Control assembly | 1 sets | |
Main function of drive power supply | ||
Monitoring parameters | Working status, frequency, power | |
Automatic parameter setting | Automatic setting of ultrasonic output power | |
Frequency following mode | Automatically with frequency | |
Automatic amplitude control | Constant amplitude mode, specific amplitude soft start function | |
System protection |
High temperature protection, overcurrent protection |
|
Power adjustment mode | Touch screen or potentiometer adjustment, continuously adjustable | |
Interface | Touch screen | |
Operation mode | Continuous work | |
Control circuit type | Digital | |
Search frequency way | Allodyne trigger | |
Frequency adjustment range |
28kHz |
|
Operating ambient temperature | Normal temperature | |
Input voltage |
380V / 50Hz |
|
Control precision |
±1% |
|
Connection mode with vibration parts | High voltage cable and hard connection |
4. Design innovations
Ultrasonic transducer components are made of high strength mg-Al alloy tubes.
High power ultrasonic transducer is used for high stability.
Imported ceramic wafers can greatly improve the sound radiation power per unit area and production efficiency.
- Previous article:No more
- Next article: Full-automatic Chain Linkage Multi-slot Cleaning Dryer